8 (800) 500-11-23

Domestic fan E 100 S C ET ERA

Article: E 100 S C ET

Design features
Sleeve-bearing motor
ABS-plastic
Slim face panel
Insect net
Mounting with screws
Cutout overheating protection
5-year warranty
Ingress protection rating for electrical equipment
Additional options
Timer
Back-draught shutter with plastic wings
The fan is used for permanent and periodic ventilation of sanitary rooms, bathrooms, kitchens and other domestic premises. The fan meets the strictest quality and safety standards. The level of protection is IP24. The motor on plain bearings does not require additional maintenance and guarantees effective removal of moist and polluted air. The fan is equipped with a disposable fuse to prevent short circuits, a check valve to prevent dust and odors from the ventilation duct, an anti-mosquito net that protects the room from insects and dirt from the shaft. The ET control board with electronic timer allows you to customize the run time with switches; 5, 15 or 30 minute intervals. By default, the unit will run for 30 min after the switch is pressed. If necessary, you can change the operation interval to 5 or 15 minutes, or disable the timer. The housing is made of high quality and durable ABS plastic, which will reliably last the whole period of use and will not yellow. Thanks to the ultra-thin front panel, the fan can be mounted almost flush with the wall. Mounting is carried out using self-tapping screws.
  • Article E 100 S C ET
  • Trade mark ERA
  • Material ABS plastic
  • Color White
  • Color (decorative) White
  • Protection class IP 24
  • Quantity in transport package 24 pieces
  • Height, mm 160
  • Width, mm 160
  • General depth, mm 92
  • Altitude mounting, mm 140
  • Mounting width, mm 140
  • Installation diameter, mm 100
  • Diameter external, mm 100
  • Performance, M3 / H 90
  • Noise level, DB (A) 35
  • Power consumption, w 14
  • Pressure, PA 39
  • Voltage, V. 220
  • Location Wall
  • Working mechanism Axial
  • Principle of ventilation Exhaust
  • Control Automatic
  • Country of origin Russia
  • Gross weight, kg 0.6
  • Net weight, kg 0.5
  • Bezel thickness 9
  • Flange depth 76
  • Check valve depth when closed 7
  • Warranty 5 years
Model range
E 100 S -02
Design options
Additionally
More detailed
E 100 S
Design options
Additionally
More detailed
E 100 S C
Design options
Additionally
More detailed
E 125 S -02
Design options
Additionally
More detailed
E 125 S
Design options
Additionally
More detailed
E 125 S C
Design options
Additionally
More detailed
E 150 S -02
Design options
Additionally
More detailed
E 150 S
Design options
Additionally
More detailed
E 150 S C
Design options
Additionally
More detailed
E 100S C -02
Design options
Additionally
More detailed
E 125S C -02
Design options
Additionally
More detailed
E 150S C -02
Design options
Additionally
More detailed
E 125 S C ET
Design options
Additionally
More detailed
E 100 S C HT
Design options
Additionally
More detailed
E 125 S C HT
Design options
Additionally
More detailed
Similar products
FLOW 5 C BB
Design options
Additionally
More detailed
WIND 120C-02
Design options
Additionally
More detailed
ERA 4C-02
Design options
Additionally
More detailed
STANDARD 5S C ET
Design options
Additionally
More detailed
FLOW 6 BB
Design options
Additionally
More detailed
WAVE 120C ET
Design options
Additionally
More detailed
ERA 5C-02
Design options
Additionally
More detailed
DISC 5
Design options
Additionally
More detailed
DISC 4 BB
Design options
Additionally
More detailed
HPS 15
Design options
Additionally
More detailed
ERA 6
Design options
Additionally
More detailed
QUADRO 5C
Design options
Additionally
More detailed
WIND 100С-02
Design options
Additionally
More detailed
STANDARD 4S C ET
Design options
Additionally
More detailed
NEO 6 S
Design options
Additionally
More detailed
ERA 4C ET
Design options
Additionally
More detailed

I want to receive news from ERA Group